Displaying a Test Pattern
40
You can display a test pattern to adjust the projected image without
connecting a computer or video device.
a
To set menu items that cannot be set while the test pattern is being
displayed or to fine-tune the projected image, project an image from
the connected device.
a
Turn on the projector.
b
Press the [Menu] button on the remote control.
c
Select the Settings menu and press [Enter].
d
Select Test Pattern.
e
Select the pattern you want to display and press [Enter].
The test pattern is displayed.
f
While the pattern is displayed, press the left or right arrow button on
the remote control or press [Enter] to cycle through the available test
patterns.
g
Adjust the image as necessary.
h
Press [Esc] to clear the test pattern.
To Next Page
Loading...
Need help?
General
