Projecting in Content Playback Mode
65
Projecting Your Playlists
You can project playlists that contain images and movies in Content Playback
mode.
a
Create your playlists and export them to a USB flash drive using the
Epson Projector Content Manager software.
a
See the Epson Projector Content Manager Operation Guide for
instructions.
b
In Content Playback mode, connect the USB flash drive into the
projector's USB-A port.
c
Press the [USB] button on the remote control.
The playlist that was played last is projected. If there is a timetable
assigned, the playlist will play back according to the schedule in the
timetable.
a
• You can also hold down the [Num] and numeric buttons to project
the favorite playlist. You can set a remote control shortcut key using
the Epson Projector Content Manager software.
• To select the target playlist from the list, press the [USB Viewer]
button on the remote control, and then use the arrow buttons.
Projecting One Image Simultaneously (Synchronized
Playback)
You can set up a timetable to simultaneously project a synchronized playlist
across multiple (up to 16) projectors.
To Next Page
Loading...
