Epson EB-U50 - Projector Indicator Status

Projector Indicator Status
166
The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
a
• If the indicators display a pattern not listed in the table below, turn
the projector off, unplug it, and contact Epson for help.
A
Power indicator
B
Status indicator
C
Lamp indicator
D
Temp (temperature) indicator
E
Wireless LAN indicator (EB‑U50)
Projector status
Indicator and status Problem and solutions
Power: Lit blue
Status: Lit blue
Lamp: Off
Temp: Off
Normal operation.
Power: Lit blue
Status: Flashing blue
Lamp: Off
Temp: Off
Warming up or shutting down. When warming up, wait
about 30 seconds for an image to appear.
All buttons are disabled during warm-up and shutting
down.
Power: Lit blue
Status: Off
Lamp: Off
Temp: Off
Standby, sleep mode, or monitoring.
When you press the power button, projection starts.
Power: Flashing blue
Status: Off
Lamp: Off
Temp: Off
Preparing for monitoring and all features are disabled.
Power: Lit blue
Status: Flashing blue
Lamp: Off
Temp: Off
Cooling down; all buttons are disabled.
Power: Indicator status
varies
Status: Flashing blue
Lamp: Flashing orange
Temp: Indicator status
varies
Refresh Mode is in progress.
s Reset > Refresh Mode