Image Shape
44
c
Use the arrow buttons to select the corner of the image you want to
adjust. Then press [Enter].
a
To reset the Quick Corner corrections, hold down [Esc] for
about two seconds while the area selection screen is displayed,
and then select Yes.
d
Press the arrow buttons to adjust the image shape as necessary.
To return to the area selection screen, press [Enter].
a
If you see this screen, you cannot adjust the shape any further in
the direction indicated by the gray triangle.
e
Repeat steps 3 and 4 as needed to adjust any remaining corners.
f
When you are finished, press [Esc].
To Next Page
Loading...
