Wireless Network Projection
93
d
Select the Wireless LAN menu and press [Enter].
e
Select the Security setting and press [Enter].
f
Select the security settings to match your network settings.
g
Do one of the following according to the security you selected.
• WPA2-PSK, WPA/WPA2-PSK: Select Complete and follow the on-
screen instructions to save your settings and exit the menus.
• WPA2-EAP, WPA/WPA2-EAP: Select EAP Method and press
[Enter].
h
Select the protocol for authentication as the EAP Type setting.
i
To import your certificate, select the certificate type and press [Enter].
• Client Certificate for the PEAP-TLS or EAP-TLS type
• CA certificate for the PEAP, PEAP-TLS, EAP-TLS, or EAP-FAST
type
a
You can also register the digital certificates from your Web
browser. However, be sure to register just once or the certificate
may not install correctly.
j
Select Register and press [Enter].
k
Follow the on-screen instructions to connect a USB storage device to
the projector's USB-A port.
To Next Page
Loading...
