Useful Functions
56
WirelessHD Settings Menu
a
Press the button.
The Configuration menu is displayed.
b
Select Settings - WirelessHD.
The WirelessHD settings screen is
displayed.
c
Make settings for each of the
displayed functions.
Available functions on the WirelessHD settings menu
Function Explanation
Device Connections Displays a list of available WirelessHD devices that can be connected. The device names
and MAC addresses (device numbers) are displayed in the list. The MAC address is
displayed on the label on the base.
WirelessHD Enables or disables the WirelessHD function.
Reception Displays the reception.
WiHD Mode
Use Normal for most situations. Full mode uses the maximum video bandwidth at all
times. Dynamic mode extends wireless ranges while optimally adjusting video band‐
width. Set to Dynamic if the image is interrupted due to weak signals and other causes.
Reset
Resets WirelessHD settings to their default settings.
WirelessHD Transmission Range
The following shows the communication transmission range for the WirelessHD. Make sure you set up the
WirelessHD Transmitter so that it faces the projector.
Horizontal direction (when WiHD Mode is set to Nor‐
mal)
Horizontal direction (when WiHD Mode is set to Dy‐
namic)
To Next Page
Loading...
Need help?
General
