Useful Functions
63
Projecting Two Different Images Using Picture
in Picture
Types of Screen that can be Displayed Simultaneously
Two different image sources can be projected, one in the main
screen (large screen) and the other in the sub screen (small screen).
You can view the sub screen while viewing the main screen.
HDMI1, HDMI2 and WirelessHD are examples of input sources that
can be displayed in Picture in Picture.
Combinations of input sources for Picture in Picture projection
HDMI1 HDMI2 WirelessHD
*
HDMI1
-
HDMI2
-
WirelessHD
*
-
*
EH-TW9200W/EH-TW8200W only
The projector uses Insta Prevue Technology from Silicon Image, Inc.
Projecting on a Picture in Picture
Starting Picture in Picture
Press the button on the remote control while the projector
is projecting.
The currently input image is displayed on a Picture in Picture.
The image so far projected then becomes the main screen.
(For EH-TW9200/EH-TW8200/EH-TW7200)
HDMI1 or HDMI2 source other than the source shown in the main
screen is displayed in the sub screen.
(For EH-TW9200W/EH-TW8200W)
The image specified in Picture in Picture - Subscreen Source is
displayed in the sub screen.
If the source being input is not supported, nothing is displayed.
Press the
button again to end the Picture in Picture dis‐
play.
c
You cannot use Picture in Picture display to project
3D images.
To Next Page
Loading...
Need help?
General
