Useful Functions
58
Switching the target image
You can switch the output image between devices, such as televisions, connected to the Output port on the
WirelessHD Transmitter and the projector.
a
Turn on the projector or the television.
b
Turn on the WirelessHD Transmitter.
The
t
indicator on the WirelessHD Transmitter turns on.
c
Point the remote control at the WirelessHD Transmitter, and then press the button.
Remote control WirelessHD Transmit‐
ter
Depending on the output target, the WiHD indicator on the WirelessHD Transmitter indicates the
following status.
On: The image is being output to the projector.
Off: The image is being output to another output device.
The output target projected last time is projected the next time the projector is turned on.
c
You can switch to the other output device even when the projector is off.
To Next Page
Loading...
Need help?
General
