Configuration Menu
72
Function Menu/Settings Explanation
Projection
Front, Front/Ceiling, Rear, Rear/Ceiling Change this setting depending on
how the projector is installed.
•
Front: Select if you are projecting
in front of the screen.
•
Front/Ceiling: Select if you are
projecting in front of the screen
suspended from the ceiling.
•
Rear: Select if you are projecting to
a rear screen from the back.
•
Rear/Ceiling: Select if you are pro‐
jecting to a rear screen from the
back when the projector is suspen‐
ded from the ceiling.
User Button
2D-to-3D Conversion, 3D Depth, 3D Brightness, Inverse
3D Glasses, Power Consumption, About
Select a Configuration menu item to
assign to the
button on the
remote control. By pressing the
button, the assigned menu
item selection/adjustment screen is
displayed, allowing you to make
one-touch settings/adjustments.
Picture in Pic‐
ture
- Starts the Picture in Picture display.
s p.63
Reset
Yes, No
Resets all Settings settings except
for Power On Link, Power Off
Link, Projection, and User Button
settings to their default settings.
*
Only EH-TW9200W/EH-TW8200W is displayed.
To Next Page
Loading...
