Light Status Solutions
A paper jam has occurred.
Remove the paper and press the
or button.
If the paper jam error continues after removing the
paper and turning the power o and on again, paper
may remain inside the printer. Load A4 size paper in
the rear paper feeder, and then press the
or
button to remove the paper inside. Load paper in the
portrait direction.
If the error cannot be cleared, contact Epson support.
A maintenance box is nearing the end of its
service life.
The light continues to ash until the maintenance
box is replaced.
You can continue printing until the
H
and lights
ash alternately.
❏ The printer was not turned o correctly.*
❏ Because the printer was turned o while
operating, the nozzles may have dried
and clogged.
* The power was turned o with a power
strip or breaker, the plug was pulled out of
the outlet, or an electrical failure occurred.
❏ After clearing the error by pressing the
or
button, press the
y
button to cancel any
pending print jobs. We recommend performing a
nozzle check.
❏ To turn o the printer, make sure you press the
P
button.
Flashing alternately:
A borderless printing ink pad is nearing or at
the end of its service life.
The borderless printing ink pad needs to be replaced.
Contact Epson or an authorised Epson service
provider to replace the borderless printing ink pad
*
.
It is not a user-serviceable part.
When a message saying that you can continue
printing is displayed on the computer, press the
or button to continue printing. The lights stop
ashing
for the time being, however, they will
continue to ash at regular intervals until the ink pad
is replaced.
Borderless printing is not available, but printing with
a border is available.
Flashing simultaneously:
An ink pad is nearing or at the end of its
service life.
The ink pad needs to be replaced. Contact Epson or
an authorized Epson service provider to replace the
ink pad. Ink pads are not user-serviceable parts.
Check the message displayed on the computer, and
then press the
or button to clear the error
or to continue cleaning.
If the ink pad has reached the end of its service life,
you can no longer perform cleaning. Printing can be
performed but the quality of the printouts cannot be
guaranteed.
Flashing alternately:
A maintenance box is at the end of its
service life.
Replace a maintenance box and press the
or
button to continue printing.
Solving Problems
>
Checking Lights and Printer Status
125
To Next Page
Loading...
Need help?
General
