Epson L3550 Series User Manual

Connecting to Devices Using Wi-Fi Direct
is method allows you to connect the printer directly to devices without a wireless router. e printer acts as a
wireless router.
1.
While holding down the
button, press the button until the light and the light ash
alternately.
Wait until the process ends.
When a connection is established, the
light turns on.
Note:
If you enable Wi-Fi Direct once, it remains enabled unless you restore the default network settings.
2.
Load papers.
3. Hold down the
button on the printer for at least seven seconds.
e
network status sheet is printed. You can check the SSID and Password for Wi-Fi Direct (Simple AP) on
this sheet.
4. On the computer's network connection screen or the smart device's Wi-Fi screen, select the same SSID shown
on the network status sheet to connect.
5. Enter the password printed on the network status sheet into the computer or smart device.
You can conrm the status of Wi-Fi Direct on the network status sheet.
In These Situations > Connecting a Smart Device and Printer Directly (Wi-Fi Direct) > Connecting to Devices Usin …
88

Epson L3550 Series Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Functions	Print, Scan, Copy
Scanner Resolution	1200 x 2400 dpi
Duplex Printing	Manual
Scanner Type	Flatbed
Connectivity	USB, Wi-Fi
Paper Capacity	100 sheets
Supported Paper Sizes	A4, A5, A6, B5, Letter
Ink Tank Capacity	70 ml (per colour)
Operating Systems	Windows, macOS
Dimensions	375 x 347 x 179 mm
Print Speed	33 ppm (black), 15 ppm (color)
Copy Speed	Black: 7.7 ipm, Colour: 3.8 ipm