If both labels (1) and (2) are attached, the value next to PASSWORD written on the label in (1) is the default value.
In this example, the default value is 03212791.
If only label (2) is attached, the serial number printed on the label in (2) is the default value. In this example, the
default value is X3B8153559.
Changing the Administrator Password
It can be changed from the printer control panel and Web Cong. When changing the password, set it with at least
8 single-byte alphanumerical characters and symbols.
Related Information
& “Running Web
Cong
on a Web Browser” on page 151
Operations that Require You to Enter the Administrator Password
If you are prompted to enter the administrator password when performing the following operations, enter the
administrator password set on the printer.
❏ When updating the rmware of the printer from a computer or smart device
❏ When logging on to the advanced settings of Web Cong
❏ When setting using an application that can change the printer's settings.
Initializing the Administrator Password
You can return the administrator password to the default settings by initializing the network settings.
Related Information
& “Buttons and Functions” on page 21
& “Where to Get Help” on page 160
Protecting Your Personal Information
If you give the printer to someone else or dispose of it, restore the default network settings by using the printer's
buttons.
Related Information
& “Buttons and Functions” on page 21
Important Instructions
>
Protecting Your Personal Information
15
To Next Page
Loading...
Need help?
General
