Attach Fax image to report:
Prints a Transmission Report with an image of the rst page of the sent document. Select On(Large
Image) to print the upper part of the page without reducing. Select On(Small Image) to print the
entire page reducing it to
t
onto the report.
Report Format:
Select a format for fax reports. Select Detail to print with error codes.
Basic Settings
Select the menus on the control panel as described below.
Settings > General Settings > Fax Settings > Basic Settings
Fax Speed:
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
ECM:
Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by
telephone line noise. If this is disabled, you cannot send or receive documents in color.
Dial Tone Detection:
Detects a dial tone before starting to dial. If the printer is connected to a PBX (Private Branch
Exchange) or digital phone line, the printer may fail to start dialing. In this situation, change the Line
Type setting to PBX. If this does not work, disable this feature. However, disabling this feature may
drop the
rst
digit of a fax number and send the fax to the wrong number.
Line Type:
Select the line type to which you have connected the printer. When using the printer in an environment
that uses extensions and requires an external access code, such as 0 and 9, to get an outside line, select
PBX and register the access code. Once you have registered the access code, enter # (hash) instead of
the access code when sending a fax to an outside fax number. For an environment that uses a DSL
modem or terminal adapter, setting to PBX is also recommended.
Header:
Enter your sender name and fax number. ese appear as a header on outgoing faxes. You can enter up
to 40 characters for your name, and up to 20 digits for your fax number.
Receive Mode:
Select the receive mode.
DRD:
If you have subscribed to a distinctive ring service from your telephone company, select the ring
pattern to be used for incoming faxes.
e
distinctive ring service,
oered
by many telephone
companies (the service name
diers
by company), allows you to have several phone numbers on one
phone line. Each number is assigned dierent ring pattern. You can use one number for voice calls and
another for fax calls. Depending on the region, this option may be On or O.
User's Guide
Faxing
138
To Next Page
Loading...
Need help?
General
