Setting Up the Printer
Follow the instructions in these sections to set up your label printer.
Connecting the AC Adapter
Installing Batteries
Inserting and Removing Tape Cartridges
Turning the Printer On and Off
Connecting the AC Adapter
Use the AC adapter to power the printer without batteries.
1. Connect the adapter to the printer's AC adapter port.
2. Plug the other end of the adapter into an electrical outlet
Parent topic: Setting Up the Printer
Installing Batteries
You can use batteries instead of the AC adapter when you are not near a power source. The printer
requires 6 AA alkaline batteries.
Caution: Make sure the power is off before you install batteries.
11
To Next Page
Loading...
