The Pull Tractor
3.
Press the LOAD/EJECT button to load the continuous paper; then
press the FORM FEED button. This advances the paper one page
so that you can fit the paper onto the pull tractor.
Note: After
you press the FORM FEED button, be careful not to
touch any of the buttons on the control panel until step 10.
CAUTION: Never use the platen knob while the printer is
turned on. To adjust the loading position, use the micro-
adjustment feature described in Chapter 3.
4.
Open the sprocket covers of the pull tractor and pull the
sprocket lock levers toward you to release them.
5-20
Using the Printer Options
To Next Page
Loading...
