Selecting an International Character Set
International character sets provide you with the characters and
symbols used in other languages. You can select one of eight
international character sets by changing the DIP switch settings.
Whenever the printer is turned on, reset, or initialized, the character
set selected by the DIP switches becomes the default character set.
To select an international character set, set DIP switches 1-1, 1-2, and
1-3 according to the table below.
This table also shows the characters that differ in each international
character set.
Country
ASCII code hex
DIP SW
23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E 1-1 1-2 1-3
0 U.S.A.
1 France
3 U.K.
4 Denmark
5 Sweden
6 Italy
7 Spain
ON
ON
ON
ON
ON
OFF
ON
OFF
ON
ON
OFF OFF
OFF
ON
ON
OFF
ON
OFF
OFF OFF
ON
OFF
OFF
OFF
CAUTION: To change the setting of a DIP switch, first turn
off the printer, change the DIP switch setting, and then
turn the printer back on.
3-20
Using the Printer
To Next Page
Loading...
