Problems and Solutions
This chapter discusses problems you may encounter while
operating your printer and their likely solutions. If you are having
difficulty achieving the desired printing result, first locate the
problem in the table below and then see the appropriate page for the
solution.
Power supply
l Power is not being supplied.
See 7-4
Printing
l The printer does not print.
l The print is faint or uneven.
l Dots are missing in the printed characters
or graphics.
l Printed characters are not what you expected.
l The print position is not what you expected.
See 7-5
See 7-6
See 7-7
See 7-8
See
7-11
Paper handling
l Single sheets do not feed properly.
See 7-14
l Continuous paper does not feed properly.
See 7-17
l Switching between single sheets and continuous
paper cannot be performed properly.
See
7-21
l The short tear-off function does not operate
properly. See 7-23
7-2
Troubleshooting
To Next Page
Loading...
