Printing on Special Paper
Except for the paper thickness lever setting, you load multi-part
paper the same way as continuous paper. For details, see the section
on loading continuous paper in this chapter. Also see the sections on
setting the loading position and page length in Chapter 3.
CAUTION: Multi-part forms should not be used with the
single-sheet feeding system or the optional cut sheet
feeder.
Labels
If you need to print labels, always use labels mounted on a
continuous backing sheet with sprocket holes for use with a tractor.
Do not try to print labels as single sheets because labels on a shiny
backing sheet almost always slip a little.
2-24
Paper Handling
To Next Page
Loading...
