Options
Problem Solution
Using the pull
tractor with the
push tractor,
continuous paper
does not feed
properly
(continued).
When the printing
ends the paper feeds
abruptly, and as it
resumes printing, the
paper
feeds
backward
and comes off the pull
tractor sprockets.
The short tear-off function may be
selected. The short tear-off function
cannot be used with the pull tractor, so be
sure to set DIP switch 2-2 to off. See
Chapter 3.
When the LOAD/EJECT
When the paper release lever is in the
button is pressed to
continuous paper position, the paper
eject the paper, the
feeds backward to eject. When using the
paper comes off the pull
pull tractor, press the
FORM FEED
button
tractor sprockets.
to feed the paper forward to eject.
Troubleshooting
7-31
To Next Page
Loading...
