Epson LQ-510 - Page 257

Commands Arranged by Topic
ESC ( -
Select Score
Format:
ASCII code:
ESC ( - n1 n2 m
d1 d2
Decimal:
27 40 45 n1 n2 m
d1 d2
Hexadecimal: 1B
28 2D n1 n2 m
d1 d2
Comments:
Use decimal or hexadecimal values for all variables, not ASCII
characters.
Use the following values for the first 3 variables:
n1 must be 3.
n2 must be 0.
m must be 1.
The value of d1 determines the location of the score:
d1 = 1 for underline.
d1 = 2 for strike-through.
d1 = 3 for overscore.
The value of d2 determines whether the score line is single,
double, broken, or continuous:
d2 = 0 Cancel the score line selected by d1.
d2 = 1 Single continuous line.
d2 = 2 Double continuous line.
d2 = 5 Single broken line.
d2 = 6 Double broken line.
Command Summary
9-31