4. Remove the new ribbon cartridge from its package and turn
the ribbon-tightening knob in the direction of the arrow to
remove any slack in the ribbon.
5. Hold the ribbon cartridge with the exposed ribbon down and
the ribbon-tightening knob facing you, and guide the ribbon
under the print head. Then snap the cartridge into place so
that the tabs on both sides of the cartridge fit into the notches
in the cartridge holder.
A6-2
A7
L
Adonis Rev.C
A5 size Chapter 6
96/12/ 19 pass 5
6-4
Maintenance and Transportation
To Next Page
Loading...
