Epson LQ-670 - Page 136

The typestyles or characters set in your application software
cannot be printed.
Cause What to do
Your application software is
not correctly configured for
your printer.
Make sure that your application
software is correctly configured for
your printer. See your application
documentation.
The printer does not print the font you selected using the
default-setting mode, the EPSON Remote! utility, or the
control panel buttons.
Cause What to do
Software settings override
settings you make in the
default-setting mode, EPSON
Remote!, or with the control
panel buttons.
Use your software to select the font.
Printing starts too high or too low on the page.
Cause What to do
The paper size settings in
your application software do
not match the size of the
paper loaded in the printer.
Change the paper size settings in your
application software or printer driver
to match the size of the paper you are
using.
L
Adonis Rev.C
A5 size Chapter 7
96/12/ 19 pass 5
7-20
Troubleshooting