3. Press the
LF/ FF
[
D
] button to feed paper forward, or press
the
Load/Eject
[
U
] button to feed paper backward, until
the paper perforation is aligned with the tear-off edge.
Note:
The printer has a minimum and a maximum tear-off position. If you
try to adjust the tear-off position beyond these limits, the printer
beeps and stops moving the paper.
4. Tear off the printed pages.
5. Press the
Pa use
button to turn off micro-adjust mode.
When you resume printing, the printer automatically feeds the
paper back to the top-of-form position and begins printing. Your
tear-off position setting remains in effect until you change it, even
if you turn off the printer.
A36
L
Adonis Rev.C
A5 size Chapter 3
96/12/ 19 pass 5
3-32
Paper Handling
To Next Page
Loading...
