Epson LS3-401 series

LS Rev.10 v
Before Reading This Manual
This section describes what you should know before reading this manual.
Structure of Control System
The LS series Manipulators can be used with the following combinations of Controllers and
software.
TYPE A:
Controller
Software
RC90 EPSON RC+ 5.0
LS3-401*, LS6-602*
RC90 Controller Firmware Version
Ver.3.0.*.*
EPSON RC+ 5.0
Before Ver.5.4.0
!!!
Ver.5.4.1 or later
OK
OK: Compatible All functions of the EPSON RC+ 5.0 and the Controller are
available.
!!!: Compatible Connection is OK. We recommend using EPSON RC+5.0 Ver.
5.4.1 or later. Controller firmware update cannot be executed.