Basic Scanning
35
2. Click the Photo Print icon. You see the Photo Print panel:
3. Make sure the EPSON printer you want to print to is selected. If the incorrect
printer is selected, click the printer icon and select your printer from the list.
4. Select the format of the original from the media types; you can choose from
Photo, Negative Film, and Positive Film (for slides and transparencies).
5. Select one of the following paper types and sizes under Print Paper: Photo Paper
4 ×
6 - Card, Photo Quality Ink Jet Card - Card, Photo Paper - Letter, Photo
Quality Glossy Film
- Letter, Premium Glossy Photo Paper - Letter.
6. From the Print Sizes list, select a size for the image to print. You can select 3 ×
5,
4 × 6, 3.5 ×
5, L - size (3.5 ×
5.1 inches),
10 ×
15 cm, or Panorama (3.5 × 10.2
inches). (The sizes you can select vary depending on your paper type and size.)
7. Select how many copies you want to print (
1
to
999
).
8. Click the
x print button to scan and print your photo or negative.
If you’re scanning multiple pages without using the ADF, you’ll see a
message after each page has scanned. Replace the document on the
table and click Yes to continue scanning. When you’re done scanning
pages and you see the message again, click No.
change to a
different printer
select print size
select paper size
and type
select media type
of source image
scan and print
basics.book Page 35 Thursday, August 31, 2000 10:08 AM
To Next Page
Loading...
