36
Basic Scanning
Scanning Something That Doesn’t Fit
Under the Document Cover
The self-adjusting document cover
allows you to place thick documents on
the document table glass without
removing the cover. If your document is
too thick to fit under the cover—such as
a photo in an album—you can remove
the document cover. To do this, simply
open the document cover and lift the
back of the document cover straight up.
When scanning with the cover removed, make sure no area of the document table is
exposed. This prevents interference from external light.
When reattaching the document cover,
hold the cover so the hinges are aligned
with the notches on the scanner. Then
lower the cover so the hinges fit into the
notches and close the document cover.
basics.book Page 36 Thursday, August 31, 2000 10:08 AM
To Next Page
Loading...
