61
Problem Solving
This chapter gives you the basics for diagnosing and solving scanner problems. For
illustrations identifying the scanner parts, see the inside back cover.
For more troubleshooting tips, see the “Troubleshooting” section of your electronic
Reference Guide, as described on page 22.
Scanner Light and Buttons
If an error occurs, the scanner stops and its indicator light shows the type of error.
Scanner indicator light
Light Color Status
Flashing Green The scanner is initializing or busy scanning.
On Green The scanner is ready to scan images.
Flashing Red The scanner may not be not properly connected to the
computer. Check the cable connection. Then turn the scanner
off and back on to reset it.
Make sure the scanner is unlocked. Turn off the scanner,
unlock the transportation lock, then turn the scanner on.
Off — The scanner is turned off.
Scanner buttons
Button Function
P
Operate Turns the scanner on and off.
]
Start
Lets you scan directly to an application with one touch. See “Setting
Up the Start Button in EPSON Smart Panel” on page 29, and your
electronic
Reference Guide
for more information.
basics.book Page 61 Thursday, August 31, 2000 10:08 AM
To Next Page
Loading...
