38
Advanced Scanning with EPSON TWAIN
Selecting TWAIN from Your Application
Once the document is placed on the scanner and the scanner is turned on, you can
start EPSON TWAIN to capture the image into your graphics application.
Follow these steps to start EPSON TWAIN from your application software (the steps
may vary, depending on your application):
1. Start your application.
2. Select the scanner source. Open the File menu and choose Select Source, Import,
or Acquire, and then select either Select TWAIN_32 Source (Windows) or
TWAIN Select
(Macintosh).
3. Select EPSON TWAIN 5 and click OK or Select.
You can also access EPSON TWAIN from EPSON Smart Panel; click the
TWAIN button on the Scan Settings screen for each option.
click to select the
scanner source
basics.book Page 38 Thursday, August 31, 2000 10:08 AM
To Next Page
Loading...
