Problem Solving
67
Scanning Problems
The file size is too big.
Adjust your scan settings. Try
selecting a lower resolution (dpi), or
scan only part of the image.
Your scanned image is faint or has
gaps.
■ Check the brightness setting.
Decrease the software or driver’s
brightness setting.
■ Try adjusting the Gamma
setting.
■ Check the condition of your
original. If the document is
damaged, dirty, or wrinkled,
these imperfections will show
up in your scan.
■ Check that the document is
placed flush against the
document table.
basics.book Page 67 Thursday, August 31, 2000 10:08 AM
To Next Page
Loading...
