66
Problem Solving
You need to uninstall your
TWAIN driver in Windows 95 or
Windows NT.
1. On the Start menu, click
Programs, EPSON Scanner,
EPSON TWAIN 5 Uninstall.
2. When you’re finished, restart
your computer.
You need to reinstall your
TWAIN driver in Windows.
For best results, first
uninstall the TWAIN
driver as described
above.
1. Insert your scanner CD-ROM
in your CD-ROM drive.
2. Click Start and Run. At the
prompt, type your CD-ROM
drive letter and EPSON (for
example: D:\EPSON).
3. On the Main Menu, select
Reinstall Scanner Software.
4. On the next screen, click the
Reinstall
button.
5. At the restart message, click
OK
.
6. In Windows 98 or Windows
2000, you see the New
Hardware Wizard screen when
your computer restarts. Follow
steps 1 through 10, starting on
page 8, to install your scanner
software.
In Windows 95, you see the
Update Device Driver Wizard
screen when your computer
restarts. Follow steps 1 through
7, starting on page 12, to install
your scanner software.
You need to reinstall your
TWAIN driver on a Macintosh.
1. Insert your scanner CD-ROM
in your CD-ROM drive.
2. Double-click the EPSON
icon.
3. On the Main Menu, select
Reinstall Scanner Software.
4. On the Reinstall window, click
the Reinstall button.
5. Read the next message, then
click Yes.
6. On the TWAIN Installer
screen, make sure Easy Install
is selected for the default
installation, then click Install.
7. After the installation is
complete, click
Restart
. If
necessary, calibrate your screen.
Then your Macintosh
automatically restarts.
basics.book Page 66 Thursday, August 31, 2000 10:08 AM
To Next Page
Loading...
