Epson Perfection4180 Photo

EPSON Perfection4180 Photo Revision A
APPENDIX ADF; Lubrication 88
7.7 ADF; Lubrication
Lubrication is required when any part of the Carriage Unit of the scanner has been
replaced or the Carriage moves with noticeably large operation noise. The specified
grease is indicated in Table 7-3, and the lubrication points are shown in Figure 7-38.
Table 7-3. Specified Grease
Figure 7-38. Lubrication Points
Type Name Part Number Supplier
Grease G-26 1080614 EPSON
<Lubrication
point>
Arms
<Oil type>
G-26
<Amount of
application>
A little
<Lubrication
point>
Inner side
<Oil type>
G-26
<Amount of
application>
A little
Hopper
Arms
ASF Frame
<Lubrication
point>
Pinion
<Oil type>
G-26
<Amount of
application>
A little
<Lubrication
point>
Gear teeth
<Oil type>
G-26
<Amount of
application>
A little
C A U T I O N
Note that over lubrication will contaminate the mechanisms or lead to
a malfunction.
ADF Motor Assy
Gear
Combination Gear