Epson PowerLite 1915 Network Guide

EasyMP Network Projection Summary
18
You need to perform steps 1 to 4 only the first time you connect.
* When the computer you are using is normally connected to the network,
you do not need to make network settings on the computer.
1. Install EasyMP Network Projection on the computer to be connected.
s p.13
2.
*
Make network settings on the computer and put it into network
connection status. s p.19
3. For Quick Connection Mode: Install the supplied or optional
Wireless LAN unit in the projector (if already installed, go to step 5).
For Advanced Connection Mode: Enable the Wired LAN adapter in
"Port Configurations". s See your computer documentation.
4. Make network settings on the projector and put it into network
connection status.s See your projector User’s Guide.
5. Start EasyMP Network Projection on the computer and connect with
the projector. s p.20

Epson PowerLite 1915 Specifications

General

Brand	Epson
Model	PowerLite 1915
Category	Projector
Language	English