Setting File Display Conditions and Slideshow Operations
68
Setting File Display Conditions and Slideshow Operations
You can set the file display order and the Slideshow operations on the
Option screen.
Procedure
A Position the cursor on "Option" at the bottom of the file list
screen, and then press the Enter button.
B When the Option screen is displayed, set each of the items.
Enable settings by positioning the cursor on the target item and
pressing the Enter button.
Details of the items are given below.
C Use the [ ][ ][ ][ ] buttons to position the cursor
over "OK" and press Enter.
The settings are applied.
If you do not want to apply the settings, position the cursor on
Cancel and press the Enter button.
Display order
You can set the order of the files to be displayed.
You can select sorting of the files into either Name
order or Date order.
Continuous
Play
You can determine whether to repeat the
Slideshow.
Screen
switching
time
You can set the time for a single file to be
displayed when playing a Slideshow. You can set a
time between No (0) and 60 Seconds. When you
set No, auto play is disabled.
Effect
You can set the screen effects when changing
slides.
To Next Page
Loading...
Need help?
General