Projecting Movies from a Computer (Movie Sending Mode)
29
Projecting Movies from a Computer (Movie Sending Mode)
In Movie Sending Mode, movie files can be sent directly to a projector.
As a result, a movie can be projected much more smoothly than when it
is being sent from an application running on a PC.
Also, because the audio is sent at the same time as the movie, there is no
need for an audio cable between the computer and the projector. You can
set to play back selected multiple files repeatedly and in order.
q
• Movie Sending Mode is valid for one projector only.
It is not possible to apply Movie Sending Mode to more than one projector.
• Depending on the communication method and the available reception, the
image and sound may skip or stall.
Supported File Types
The file types supported by Movie Sending Mode are listed in the
following table.
Files to which DRM (Digital Rights Management) is applied cannot be
projected.
Playing Back a Movie
Procedure
A Click the button on the toolbar.
The projector selection screen is displayed.
B Select the projector you want to use to playback the movie
and click "OK".
The Movie Sending Mode screen appears.
C Click "Select file".
File Type
(Extension)
Video Codec Audio Codec Recording
Quality
.mpg
.mpeg
MPEG-2 MPEG-1 Layer1/2
MPEG contents with no
sound can be played back.
Linear PCM and AC-3 audio
cannot be played back.
Highest frame
rate: 30 fps
Maximum
resolution:
720×576
.mp4 MPEG-4 ASP
MPEG-4 AVC
MPEG-4
AAC-LC
.wmv
.asf
WMV8
WMV9
WMA
To Next Page
Loading...
Need help?
General