Management Using SNMP
55
Management Using SNMP
By setting SNMP from the projector's Configuration Menu, notification
messages are sent to preset e-mail addresses when a problem or warning
occurs with a projector. This is useful when controlling projectors
collectively at a point distant from them.
s See your projector User’s Guide.
q
• SNMP should be managed by a network administrator or someone who is
familiar with the network.
• To use the SNMP function to monitor the projector, you need to install the
SNMP manager program on your computer.
• The managing function using SNMP cannot be used via Wireless LAN in
Quick Connection Mode.
• Up to two destination IP addresses can be saved.
To Next Page
Loading...
Need help?
General