Connecting to a Projector on a Network and Projecting
25
Stop
Stops projection while connected to the projector. A black
screen is projected while stopped. Audio does not stop. To
stop the audio, or to display a User's Logo while projection is
stopped, use A/V Mute.
Show
Releases Stop or Pause.
Pause
Pauses projected images while connecting to the projector.
Audio does not Pause.
Presentation Mode
Each time this is clicked, Presentation Mode switches
between enabled/disabled.
Projector control
While the projector is connected to the network, the
projector's A/V Mute, Switch PC source and Switch video
source functions can be controlled from both the Remote
Control and the projector's Control panel.
Click to display the following toolbar.
A/V Mute
A/V Mute
The same function as the A/V Mute button on
the Remote Control.
s See your projector User’s Guide.
Switch PC source
Switch PC source
The Source alternates between Computer1,
Computer2, USB Display, USB1, USB2 and LAN
each time you click.
Switch video source
Switch video source
The Source alternates between S-Video, Video,
and HDMI each time you click.S-Video does not
switch if the cable is not connected.
To Next Page
Loading...
Need help?
General