Epson PowerLite 1915 Network Guide

Using Multi-Screen Display
36
• For Screen Resolution settings, see s p.79
When the monitor icon is arranged, a virtual display is connected
as the image like below.
F Click the "OK" button. The Display Properties screen closes.
Up to this point, the virtual display layout has been fixed.
Allocate the projecting images next.s p.37
For Macintosh
A Start EasyMP Network Projection. Double-click the
Applications folder of the hard drive volume in which
EasyMP Network Projection is installed, and then
double-click the EasyMP Network Projection icon.
Select Advanced Connection Mode and then perform startup.
B Select the "Use multi-display" check box.
Display layout and Display preferences are added at the bottom of
the screen.
C Click "Display preferences".
The display setting screen is displayed.
31

Epson PowerLite 1915 Specifications

General

Brand	Epson
Model	PowerLite 1915
Category	Projector
Language	English