EasyManuals Logo

Epson PowerLite 1915 Network Guide

Epson PowerLite 1915
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Troubleshooting
93
Is Standby Mode set to Network On? To use the Mail Notification function when the projector is in standby, set Network On in Standby
Mode from the Configuration Menu.s See your projector User’s Guide.
Did a fatal abnormality occur and the projector come to a
sudden stop?
When the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the abnormal status continues, contact Epson. s See your projector
User’s Guide.
Is power being supplied to the projector? Check that there has not been a local power failure or that the circuit breaker for the electrical outlet
of the projector has not been tripped.
Is the network cable connected correctly?
For Wired LAN
Check that the network cable is connected correctly. Reconnect it if it is not connected or not
connected properly.
Check Remedy

Table of Contents

Other manuals for Epson PowerLite 1915

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite 1915 and is the answer not in the manual?

Epson PowerLite 1915 Specifications

General IconGeneral
BrandEpson
ModelPowerLite 1915
CategoryProjector
LanguageEnglish

Related product manuals