136 Fine-Tuning the Projector
Automatically Running Quick Setup
To automatically run quick setup whenever you turn on the projector,
follow these steps:
1. Press the
Menu button on the remote control.
You see the projector’s menu screen.
2. Select the
Setting menu and press Enter. Then select Quick
Setup
and press Enter.
3. Select
Startup Options and press Enter.
4. Select
Quick Setup and press Enter.
5. Press the
Menu button to exit.
note
Auomatic Quick Setup
works only when the
projector is set to
Front
projection
. See page 187
for more information.
To Next Page
Loading...
Need help?
General