22 Setting Up the Projector
■ To receive a component video signal from a DVD player or other
video device, you’ll need a component-to-VGA video cable. One
may be included with your video equipment, or you can purchase
the ELPKC19 cable from an authorized Epson reseller or from an
electronics dealer. See “Optional Accessories” on page 17.
■ To receive an S-Video signal, you’ll need an S-Video cable. One
may be included with your video equipment, or you can purchase
one from an authorized Epson reseller or from an electronics
dealer. See “Optional Accessories” on page 17.
■ To receive an audio signal, you’ll need an RCA-type audio cable
with two male plugs (PowerLite X10+/PowerLite W10+), or a
stereo mini-jack to RCA-type audio adapter cable (with red and
white jacks on one end; PowerLite S10+).
To Next Page
Loading...
Need help?
General