Setting Up the Projector 35
Connecting a Composite Video Source
1. If your video cable has an RCA connector, connect it to the
yellow video output connector on your device and the yellow
Video port on the projector.
2. If you want to play sound through the projector, see page 40 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 43 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the video cable was not
rovided with your video
device, you can purchase one
rom an electronics dealer.
PowerLite S10+
Video port
PowerLite X10+/PowerLite W10+
Video port
To Next Page
Loading...
Need help?
General