Setting Up the Projector 21
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. See page 91 for transportation
instructions. If you are moving the projector by hand, use the carrying
case.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an HDMI signal from your video device, you’ll need
an HDMI cable (PowerLite X10+/PowerLite W10+ only). One
may be provided with your video equipment.
Projector
Remote control
Projector PDF
manual CD-ROM
Power cord
VGA computer cable
Password Protected
sticker
USB cableCarrying case
2 AA batteries
(for remote control)
PowerLite X10+/PowerLite W10+
Adhesive skin
To Next Page
Loading...
Need help?
General