Epson PowerLite S10+ User Manual

52 Displaying and Adjusting the Image
Focusing and Zooming the Image
Turn the focus ring on the projector to sharpen the image.
PowerLite S10+: To enlarge or reduce the image, press the
Wide
(enlarge) or
Tele (reduce) button on the projector’s control panel.
You can also use the
Zoom setting in the projector’s Settings menu;
see page 73 for instructions.
If the image still isn’t large enough, you may need to move the
projector farther away from the screen.
You can also use the
E-Zoom buttons on the remote control to zoom
in on a portion of the image. See page 59 for instructions.
PowerLite X10+/PowerLite W10+: To enlarge or reduce the image,
turn the zoom ring.
PowerLite S10+ PowerLite X10+/ PowerLite W10+
Wide button Tele button

Epson PowerLite S10+ Specifications

General

Contrast Ratio	2000:1
Lamp Life	4000 hours (Normal Mode), 5000 hours (Eco Mode)
Display Technology	3LCD
Noise Level	37 dB (Normal Mode), 29 dB (Eco Mode)
Lamp Type	UHE
Keystone Correction	Vertical ±30 degrees
Input Ports	VGA, S-Video, Composite Video
Output Ports	VGA
Projection Size	30 - 300 inches