Epson PowerLite S10+ - Page 51

Displaying and Adjusting the Image 51
If your image is still distorted, or you are using the PowerLite S10+
projector, do one of the following:
■ Press the appropriate keystone correction button on the
projector’s control panel until the shape is evenly rectangular.
■ Select the Keystone setting in the projector’s Settings menu (see
page 73). Then use the arrow buttons on the remote control to
adjust the shape of the image.
Keystone
correction
buttons
PowerLite S10+
PowerLite X10+/PowerLite W10+
Keystone
correction
buttons