34 Setting Up the Projector
Connecting an HDMI Video Source
(PowerLite X10+/PowerLite W10+ Only)
For the best image and sound quality, connect your video equipment
to the HDMI (High-Definition Multimedia Interface) port, if
possible.
Connect an HDMI cable to the HDMI connector on your video
equipment and the
HDMI connector on the projector.
When you’ve finished making connections, see page 43 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If an HDMI cable was not
rovided with your video
equipment, you can
urchase one from an
electronics dealer.
HDMI port
To Next Page
Loading...
Need help?
General