Displaying and Adjusting the Image 49
Adjusting the Image
Once you see your image, you may need to make certain adjustments:
■ If the image is too high or too low, reposition it as described on
page 49.
■ If the image isn’t square, see page 50.
■ To focus or zoom your image, see page 52.
■ To quickly adjust the color, brightness, or contrast, see page 53.
■ To change the image aspect ratio, see page 54.
■ If you need to fine-tune the image and/or sound, see Chapter 4.
Adjusting the Position of the Image
If the image is too low on the screen, you can use the front adjustable
foot to raise it.
1. Press the foot release lever up and lift the front of the projector.
2. Once the image is positioned where you want it, release the lever
to lock the foot in position.
To Next Page
Loading...
Need help?
General