Setting Up the Projector
29
4. You may also be able to use the remote control as a wireless mouse
(see page 52).
When you’ve finished making connections, see page 37 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Connecting to Video Equipment
You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■ If your video device has a yellow RCA video output connector, see
“Connecting a Composite Video Source” on page 30.
■ If your video device has an S-video connector, see “Connecting an
S-video Source” on page 31.
■ If your video device has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a
Component Video Source” on page 32.
■ If your video device has an RGB video port, see “Connecting an
RGB Video Source” on page 33.
After connecting video cables, you may also want to connect an
optional audio cable to play sound through the projector; see page 35.
To Next Page
Loading...
Need help?
General