Setting Up the Projector
31
Connecting an S-video Source
1. Connect the S-video cable to the S-video connector on your
device and the
S-Video
port on the projector.
2. If you want to play sound through the projector, see page 35 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 37 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the S-video cable was not
rovided with your video
device, you can purchase one
rom Epson; see page 16.
S-Video port
To Next Page
Loading...
Need help?
General