Setting Up the Projector
33
Connecting an RGB Video Source
You can connect to an RGB video source using the VGA computer
cable provided with the projector.
1. Connect the cable to the RGB video port on your player and the
Computer (Component Video)
port on the projector.
2. You may need to change the
Input Signal
setting in the
projector’s Signal menu to
RGB
(see page 60).
3. If you want to play sound through the projector, see page 35 for
instructions on connecting audio cables.
When you’ve finished making connections, see page 37 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Computer (Component
Video) port
To Next Page
Loading...
