Fine-Tuning the Projector
57
Restoring the Default Settings
You can use the
Reset
option on any menu to restore the
factory-default settings for the settings in that menu.
To restore all the projector settings to their factory-default values,
select the
Reset
menu, highlight
Reset All
, press
Enter
, and select
Yes
to confirm.
Adjusting the Image
You can use the Image menu to adjust the brightness, sharpness, color,
tint, contrast, and Auto Iris settings.
1. Press the
Menu
button on the projector or remote control and
select the
Image
menu. You see a screen similar to one of these:
note
When you select
Reset All
in the Reset menu, it does
not reset the Input Signal,
User’s Logo, Language, or
Lamp Hours settings.
Component video/Composite video/
S-video
Computer/USB display/RGB video
To Next Page
Loading...
Need help?
General